11,00 mm-DRILL BIT UF IZAR STD. INTERNAL COOLANT 10XD X-ALCR
- IZAR Std.
- UF Grain
- X - AlCr
- 11.00
- 12.00
- 175
- 120
- 2
- 140º
- Flat
- 1
- Steel
- Stainless
- Cast Iron
- Construction / Carbon Steel (<250 HB / <850 N/mm2)
- 45-55 HRC
- Alloyed Steel (<300 HB / <1000 N/mm2)
- Treated / Heat-Treatable Alloyed Steel (300-400 HB / 1000-1300 N/mm2)
- Austenitic Stainless (<250 HB / <850 N/mm2)
- Cast Iron (<200 HB / <700 N/mm2)
- Aleaciones termorresistentes
- 0.280
- 90-100
- 0.240
- 70-80
- 0.120
- 60-70
- 0.065
- 45-60
- 0.300
- 60-70
P.1 Construction / Carbon Steel  (<250 HB/<850 N/mm2)               Feed (mm/rev.) 0.280       Cutting Speed (m/min.) 90-100 
P.2 Alloyed Steel  (<300 HB / <1000 N/mm2)                          Feed (mm/rev.) 0.240       Cutting Speed (m/min.) 70-80 
P.3 Treated/Heat-Treatable Alloyed Steel (300-400HB/1000-1300N/mm2)  Feed (mm/rev.)0.120       Cutting Speed (m/min.) 60-70 
M Austenitic Stainless  (<250 HB / <850 N/mm2)                    Feed (mm/rev.)   0.065       Cutting Speed (m/min.) 45-60 
K.1 Cast Iron  (<200 HB / <700 N/mm2)                               Feed (mm/rev.) 0.300       Cutting Speed (m/min.) 60-70