0,01/04X19-MACHINE-TAP SPIRAL HSSE DIN5156 (GAS-BSP)
- 5156
- HSSE 5% Co
- 11.00
- 100.00
- 22.00
- G 1/4
- 19
- 3
- 35º
- Machine
- C 2-3h
- 9.00
- 1
- Aluminium-Magnesium
- Copper-Bronze-Brass
- Cast Iron
- Steel
- Alloys Al-Mg Si < 10% (<180 HB / <600 N/mm2)
- Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
- Al-Mg non-alloyed (<100 HB / <350 N/mm2)
- Long Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
- Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
- Cast Iron (200-300 HB / 700-1000 N/mm2)
- Cast Iron (<200 HB / <700 N/mm2)
- Construction / Carbon Steel (<250 HB / <850 N/mm2)
Cutting Speed (m/min.)                                                            6-10     Cutting Speed (m/min.) 7-10 
Cutting Speed (m/min.)                                                            4-7      Cutting Speed (m/min.) 5-8 
Cutting Speed (m/min.)                                                            8-12     Cutting Speed (m/min.) 15-35 
Cutting Speed (m/min.)                                                            14-20    Cutting Speed (m/min.) 12-15