13,00 mm-BROCA HSSE DIN340TS LARGA-
TECHNICAL DETAILS:
DIN 
COM_VIRTUEMART_335936
- 340
DIN Type
COM_VIRTUEMART_336123
- TS
Tool Mat
COM_VIRTUEMART_336055
- HSSE 5% Co
D mm
COM_VIRTUEMART_335920
- 3.25
d mm
COM_VIRTUEMART_335925
- 3.25
L mm
COM_VIRTUEMART_336001
- 106
l mm
COM_VIRTUEMART_336002
- 69.00
Point Angle
COM_VIRTUEMART_335884
- 135º
Shank
COM_VIRTUEMART_336020
- Straight
Uds Pack
COM_VIRTUEMART_336156
- 1
APPLICATION
Group
COM_VIRTUEMART_335978
- Synthetic-Plastics
- Aluminium-Magnesium
- Cast Iron
- Steel
Mat
COM_VIRTUEMART_336022
- Thermo-Plastics
- Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
- Cast Iron (200-300 HB / 700-1000 N/mm2)
- Cast Iron (<200 HB / <700 N/mm2)
- Treated / Heat-Treatable Alloyed Steel (300-400 HB / 1000-1300 N/mm2)
- Alloyed Steel (<300 HB / <1000 N/mm2)
1.2 Alloyed Steel (<300 HB / <1000 N/mm2) Feed (mm/rev.) 0,050 Cutting Speed (m/min.) 20-25
1.3 Treated/Heat-Treatable Alloyed Steel (300-400HB/850-1300N/mm2) Feed (mm/rev.) 0,045 Cutting Speed (m/min.) 8-15
3.1 Cast Iron (<200 HB / <700 N/mm2) Feed (mm/rev.) 0,100 Cutting Speed (m/min.) 30-35
3.2 Cast Iron (200-300 HB / 700-1000 N/mm2) Feed (mm/rev.) 0,080 Cutting Speed (m/min.) 25-30
6.3 Al-Mg Si > 10% Alloy (<180 HB / <600 N/mm2) Feed (mm/rev.) 0,100 Cutting Speed (m/min.) 40-50
7.1 Thermo-Plastics Feed (mm/rev.) 0,150 Cutting Speed (m/min.) 34-45
- TN-16-IR-100-W-P620-PLAQUITA INTERCAMBIABLE ROSCADO INTERIOR PERFIL TOTAL (W)( Ref.: 8622);
TN-16-IR-200-W-P620-PLAQUITA INTERCAMBIABLE ROSCADO INTERIOR PERFIL TOTAL (W)- - PH 1 - L50-PUNTA ATORNILLAR DIN3126 STANDARD( Ref.: 1520);
SET PH1-2-3 Tx10-15-20-25-30-40 PZ1-2-3-PUNTA ATORNILLAR DIN3126 STANDARD-
