11,60 mm-BROCA UF IZAR STD. REFRIGERACION INTERIOR 8XD-X-ALCR
07,80 mm-DRILL BIT UF IZAR STD. INTERNAL COOLANT 8XD X-ALCR
- IZAR Std.
- UF Grain
- X - AlCr
- 7.80
- 8.00
- 126
- 76.00
- 2
- 140º
- Flat
- 1
- Steel
- Stainless
- Cast Iron
- Thermo-Resistant Alloys
- Construction / Carbon Steel (<250 HB / <850 N/mm2)
- 45-55 HRC
- Alloyed Steel (<300 HB / <1000 N/mm2)
- Treated / Heat-Treatable Alloyed Steel (300-400 HB / 1000-1300 N/mm2)
- Materiales resistentes al desgaste (400-500 HB / 1300-1800 N/mm2)
- Austenitic Stainless (<250 HB / <850 N/mm2)
- Ferritic / Martensitic Stainless (<320 HB / <850 N/mm2)
- Cast Iron (<200 HB / <700 N/mm2)
- Cast Iron (200-300 HB / 700-1000 N/mm2)
- Aleaciones termorresistentes
- 0.230
- 100-120
- 0.190
- 90-110
- 0.100
- 75-95
- 0.060
- 0.060
- 60-70
- 0.100
- 50-65
- 0.200
- 125-150
- 0.175
- 90-110
- 0.060
P.1 Construction / Carbon Steel (<250 HB/<850 N/mm2) Feed (mm/rev.) 0.230 Cutting Speed (m/min.) 100-120
P.2 Alloyed Steel (<300 HB / <1000 N/mm2) Feed (mm/rev.) 0.190 Cutting Speed (m/min.) 90-110
P.3 Treated/Heat-Treatable Alloyed Steel (300-400HB/1000-1300N/mm2) Feed (mm/rev.)0.100 Cutting Speed (m/min.) 75-95
P.4 Hardox (400-500 HB / 1300-1800 N/mm2) Feed (mm/rev.) 0.060 Cutting Speed (m/min.) 35-40
M Austenitic Stainless (<250 HB / <850 N/mm2) Feed (mm/rev.) 0.060 Cutting Speed (m/min.) 60-70
P.5 Ferritic/Martensitic Stainless (320HB/<850 N/mm2) Feed (mm/rev.) 0.100 Cutting Speed (m/min.) 50-65
K.1 Cast Iron (<200 HB / <700 N/mm2) Feed (mm/rev.) 0.200 Cutting Speed (m/min.) 125-150
K.2 Cast Iron (200-300 HB / 700-1000 N/mm2) Feed (mm/rev.) 0.175 Cutting Speed (m/min.) 90-110
S Heat-Resistant Alloys Feed (mm/0.060 Cutting Speed (m/min.) 35-50