01,50 mm-FRESA HSSE8% DIN327N 2Z-TIALSIN
05,00 mm-END MILL HSSE8% DIN327N 2Z-TIALSIN
- 327
- N
- HSSE 8% Co
- TIALSIN
- 5.00
- 6.00
- 52.00
- 8.00
- 2
- 30º
- Weldon
- 1641/1
- 1
- Aluminium-Magnesium
- Cast Iron
- Steel
- Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
- Alloys Al-Mg Si < 10% (<180 HB / <600 N/mm2)
- Al-Mg non-alloyed (<100 HB / <350 N/mm2)
- Cast Iron (200-300 HB / 700-1000 N/mm2)
- Cast Iron (<200 HB / <700 N/mm2)
- Construction / Carbon Steel (<250 HB / <850 N/mm2)
1.1 Construction / Carbon Steel (<250 HB/<850 N/mm2) Feed (mm/rev.) 0,030 Cutting Speed (m/min.) 30-40
3.1 Cast Iron (<200 HB / <700 N/mm2) Feed (mm/rev.) 0,030 Cutting Speed (m/min.) 20-30
3.2 Cast Iron (200-300 HB / 700-1000 N/mm2) Feed (mm/rev.) 0,030 Cutting Speed (m/min.) 15-20
5.1 Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2) Feed (mm/rev.) 0,030 Cutting Speed (m/min.) 60-100
5.2 Long Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2) Feed (mm/rev.) 0,030 Cutting Speed (m/min.) 60-100
6.1 Al-Mg non-alloyed (<100 HB / <350 N/mm2) Feed (mm/rev.) 0,025 Cutting Speed (m/min.) 160-200
6.2 Al-Mg Si < 10% Alloy (<180 HB / <600 N/mm2) Feed (mm/rev.) 0,025 Cutting Speed (m/min.) 160-200
6.3 Al-Mg Si > 10% Alloy (<180 HB / <600 N/mm2) Feed (mm/rev.) 0,020 Cutting Speed (m/min.) 160-200