08,00 mm-FRESA HSSE8% IZAR-STD.N LARGA 2Z-TIALSIN
12,00 mm-END MILL HSSE8% IZAR-STD.N LONG 2Z-TIALSIN
- IZAR Std.
- N
- HSSE 8% Co
- TIALSIN
- 12.00
- 12.00
- 110
- 26.00
- 2
- 30º
- Weldon
- 1
- Aluminium-Magnesium
- Copper-Bronze-Brass
- Cast Iron
- Steel
- Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
- Alloys Al-Mg Si < 10% (<180 HB / <600 N/mm2)
- Al-Mg non-alloyed (<100 HB / <350 N/mm2)
- Long Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
- Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
- Cast Iron (200-300 HB / 700-1000 N/mm2)
- Cast Iron (<200 HB / <700 N/mm2)
- Construction / Carbon Steel (<250 HB / <850 N/mm2)
1.1 Construction / Carbon Steel (<250 HB/<850 N/mm2) Feed (mm/rev.) 0,060 Cutting Speed (m/min.) 40-56
3.1 Cast Iron (<200 HB / <700 N/mm2) Feed (mm/rev.) 0,060 Cutting Speed (m/min.) 25-45
3.2 Cast Iron (200-300 HB / 700-1000 N/mm2) Feed (mm/rev.) 0,060 Cutting Speed (m/min.) 20-25
5.1 Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2) Feed (mm/rev.) 0,060 Cutting Speed (m/min.) 80-140
5.2 Long Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2) Feed (mm/rev.) 0,060 Cutting Speed (m/min.) 80-140
6.1 Al-Mg non-alloyed (<100 HB / <350 N/mm2) Feed (mm/rev.) 0,080 Cutting Speed (m/min.) 220-280
6.2 Al-Mg Si < 10% Alloy (<180 HB / <600 N/mm2) Feed (mm/rev.) 0,080 Cutting Speed (m/min.) 220-280
6.3 Al-Mg Si > 10% Alloy (<180 HB / <600 N/mm2) Feed (mm/rev.) 0,060 Cutting Speed (m/min.) 70-110