32,00 mm-FRESA PMX DIN844N NZ-
- 844
- N
- PMX
- 8.00
- 10.00
- 69.00
- 19.00
- 4
- 30º
- Weldon
- 1
- Cast Iron
- Stainless
- Steel
- Alloyed Steel (<300 HB / <1000 N/mm2)
- Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
- Treated / Heat-Treatable Alloyed Steel (300-400 HB / 1000-1300 N/mm2)
- Austenitic Stainless (<250 HB / <850 N/mm2)
- Ferritic / Martensitic Stainless (<320 HB / <850 N/mm2)
- Cast Iron (<200 HB / <700 N/mm2)
- Cast Iron (200-300 HB / 700-1000 N/mm2)
- Titanium Alloys
- Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
- Alloys Al-Mg Si < 10% (<180 HB / <600 N/mm2)
- 0.035
- 30-42
- 0.030
- 12-18
- 0.030
- 16-22
- 0.030
- 18-24
- 0.035
- 24-36
- 0.035
- 24-36
- 0.062
- 18-24
- 0.062
- 70-120
- 0.062
- 190-240
- 60-96
P.2 Alloyed Steel (<300 HB / <1000 N/mm2) Feed (mm/rev.) 0,035 Cutting Speed (m/min.) 30-42
P.3 Treated/Heat-Treatable Alloyed Steel (300-400HB/1000-1300N/mm2) Feed (mm/rev.)0,030 Cutting Speed (m/min.) 12-18
M Austenitic Stainless (<250 HB / <850 N/mm2) Feed (mm/rev.) 0,030 Cutting Speed (m/min.) 16-22
P.5 Ferritic/Martensitic Stainless (320HB/<850 N/mm2) Feed (mm/rev.) 0,030 Cutting Speed (m/min.) 18-24
K.1 Cast Iron (<200 HB / <700 N/mm2) Feed (mm/rev.) 0,035 Cutting Speed (m/min.) 24-36
K.2 Cast Iron (200-300 HB / 700-1000 N/mm2) Feed (mm/rev.) 0,035 Cutting Speed (m/min.) 24-36
S Heat-Resistant Alloys Feed (mm/0,062 Cutting Speed (m/min.) 18-24
N.1 Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2) Feed (mm/rev.) 0,062 Cutting Speed (m/min.) 70-120
N.4 Al-Mg Si < 10% Alloy (<180 HB / <600 N/mm2) Feed (mm/rev.) 0,062 Cutting Speed (m/min.) 190-240
N.5 Al-Mg Si > 10% Alloy (<180 HB / <600 N/mm2) Feed (mm/rev.) 0,035 Cutting Speed (m/min.) 60-96