SET AZUL 4-5-6-8-10-12 ALCRO-PRO-FRESA MICROGRANO DIN6528N 4Z-CROMAX
BLUE SET 4-5-6-8-10-12 CROMAX-GENERAL PURPOSE 4Z SHORT SERIES END MILL
- 6528
- N
- Micrograin
- CROMAX
- 4
- 30º
- Flat
- 6
- Synthetic-Plastics
- Stainless
- Steel
- Cast Iron
- Aluminium-Magnesium
- Austenitic Stainless (<250 HB / <850 N/mm2)
- Al-Mg non-alloyed (<100 HB / <350 N/mm2)
- Long Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
- Ferritic / Martensitic Stainless (<320 HB / <850 N/mm2)
- Construction / Carbon Steel (<250 HB / <850 N/mm2)
- Cast Iron (200-300 HB / 700-1000 N/mm2)
- Cast Iron (<200 HB / <700 N/mm2)
- Alloyed Steel (<300 HB / <1000 N/mm2)
- Thermo-Plastics
- Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
- Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
- Titanium Alloys
- Treated / Heat-Treatable Alloyed Steel (300-400 HB / 1000-1300 N/mm2)
- Alloys Al-Mg Si < 10% (<180 HB / <600 N/mm2)
- Hard-Plastics
- 0.002
- 125-160
- 0.002
- 112-150
- 0.002
- 60-130
- 0.002
- 50-80
- 0.002
- 100-130
- 0.008
- 68-95
- 0.008
- 40-60
P.1 Construction / Carbon Steel (<250 HB/<850 N/mm2) Feed (mm/rev.) 0,002 Cutting Speed (m/min.) 125-160
P.2 Alloyed Steel (<300 HB / <1000 N/mm2) Feed (mm/rev.) 0,002 Cutting Speed (m/min.) 112-150
P.3 Treated/Heat-Treatable Alloyed Steel (300-400HB/850-1300N/mm2) Feed (mm/rev.) 0,002 Cutting Speed (m/min.) 60-130
M Austenitic Stainless (<250 HB / <850 N/mm2) Feed (mm/rev.)0,002 Cutting Speed (m/min.) 50-80
P.5 Ferritic/Martensitic Stainless (320HB/<850 N/mm2) Feed (mm/rev.)0,002 Cutting Speed (m/min.) 100-130
K.1 Cast Iron (<200 HB / <700 N/mm2) Feed (mm/rev.) 0,008 Cutting Speed (m/min.) 68-95
3.2 Cast Iron (200-300 HB / 700-1000 N/mm2) Feed (mm/rev.) 0,008 Cutting Speed (m/min.) 40-60
4 Titanium Alloys Feed (mm/rev.) 0,015 Cutting Speed (m/min.) 50-68
5.1 Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2) Feed (mm/rev.) 0,006 Cutting Speed (m/min.) 140-350
N.2 Long Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2) Feed (mm/rev.) 0,006 Cutting Speed (m/min.) 140-350
N.3 Al-Mg non-alloyed (<100 HB / <350 N/mm2) Feed (mm/rev.) 0,005 Cutting Speed (m/min.) 140-420
N.4 Al-Mg Si < 10% Alloy (<180 HB / <600 N/mm2) Feed (mm/rev.) 0,005 Cutting Speed (m/min.) 140-420
N.5 Al-Mg Si > 10% Alloy (<180 HB / <600 N/mm2) Feed (mm/rev.) 0,005 Cutting Speed (m/min.) 100-300
N.6 Thermo-Plastics Feed (mm/rev.) 0,002 Cutting Speed (m/min.) 140-280
7.2 Hard-Plastics Feed (mm/rev.) 0,001 Cutting Speed (m/min.) 70-175