03,00-FRESA MICROGRANO W 1Z ALUMINIO-
Ref.: 9419
05,00-END MILL MICROGRAIN W 1Z ALUMINIUM
Product Code: 58857
TECHNICAL DETAILS:
DIN Type 
COM_VIRTUEMART_336123
- W
Tool Mat
COM_VIRTUEMART_336055
- K30F
D mm
COM_VIRTUEMART_335920
- 5.00
d mm
COM_VIRTUEMART_335925
- 5.00
L mm
COM_VIRTUEMART_336001
- 50.00
l mm
COM_VIRTUEMART_336002
- 16.00
Z
COM_VIRTUEMART_336171
- 1
Helix Angle
COM_VIRTUEMART_335881
- 30º
Shank
COM_VIRTUEMART_336020
- Flat
Uds Pack
COM_VIRTUEMART_336156
- 1
APPLICATION
Group
COM_VIRTUEMART_335978
- Synthetic-Plastics
- Aluminium-Magnesium
- Aluminium-Magnesium
Mat
COM_VIRTUEMART_336022
- Hard-Plastics
- Thermo-Plastics
- Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
- Alloys Al-Mg Si < 10% (<180 HB / <600 N/mm2)
- Al-Mg non-alloyed (<100 HB / <350 N/mm2)
N.3 mm/rev.
COM_VIRTUEMART_335846
- 0.050
N.3 Vc
COM_VIRTUEMART_335848
- 100-350
N.4 mm/rev.
COM_VIRTUEMART_335850
- 0.050
N.4 Vc
COM_VIRTUEMART_335852
- 100-350
COM_VIRTUEMART_335856
COM_VIRTUEMART_335856
- 100-350
COM_VIRTUEMART_335860
COM_VIRTUEMART_335860
- 100-200
N.3 Al-Mg non-alloyed (<100 HB / <350 N/mm2) Feed (mm/rev.) 0,050 Cutting Speed (m/min.) 100-350
N.4 Al-Mg Si < 10% Alloy (<180 HB / <600 N/mm2) Feed (mm/rev.) 0,050 Cutting Speed (m/min.) 100-350
N.5 Al-Mg Si > 10% Alloy (<180 HB / <600 N/mm2) Feed (mm/rev.) 0,050 Cutting Speed (m/min.) 100-350
N.6 Thermo-Plastics Feed (mm/rev.) 0,030 Cutting Speed (m/min.) 100-200
N.7 Hard-Plastics Feed (mm/rev.) 0,025 Cutting Speed (m/min.) 50-125