20,00 mm R 3,00-FRESA HELICE ALTERNA RADIO GRANO UF DIN6528N LARGA NZ-IKRA
14,00 mm R 1,00-RADIUS LONG END MILL GRAIN UF DIN6528N NZ UNEQUAL-HELIX-IKRA
- 6528
- N
- UF Grain
- IKRA
- 14.00
- 14.00
- 150
- 4
- Flat
- 1.00
- 1
- Cast Iron
- Stainless
- Steel
- Long Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
- Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
- Titanium Alloys
- Cast Iron (200-300 HB / 700-1000 N/mm2)
- Cast Iron (<200 HB / <700 N/mm2)
- Ferritic / Martensitic Stainless (<320 HB / <850 N/mm2)
- Austenitic Stainless (<250 HB / <850 N/mm2)
- Treated / Heat-Treatable Alloyed Steel (300-400 HB / 1000-1300 N/mm2)
- Alloyed Steel (<300 HB / <1000 N/mm2)
- 0.112
- 112-150
- 0.084
- 60-130
- 0.070
- 50-80
- 0.080
- 100-130
- 0.112
- 140-350
- 140-350
- 0
- 70-90
- 0
- 100-130
P.2 Alloyed Steel (<300 HB / <1000 N/mm2) Feed (mm/rev.) 0.112 Cutting Speed (m/min.) 112-150
P.3 Treated/Heat-Treatable Alloyed Steel (300-400HB/1000-1300N/mm2) Feed (mm/rev.)0.084 Cutting Speed (m/min.) 60-130
M Austenitic Stainless (<250 HB / <850 N/mm2) Feed (mm/rev.) 0.070 Cutting Speed (m/min.) 50-80
P.5 Ferritic/Martensitic Stainless (320HB/<850 N/mm2) Feed (mm/rev.) 0.080 Cutting Speed (m/min.) 100-130
N.1 Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2) Feed (mm/rev.) 0.112 Cutting Speed (m/min.) 140-350
N.2 Long Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2) Feed (mm/rev.) 0.112 Cutting Speed (m/min.) 140-350
S Ti6Al44V mm/z 0,050 Cutting Speed (m/min.) 70-90
S Inconel 718 mm/z 0,050 Cutting Speed (m/min.) 100-130