D03,85-R1,00-G8-FRESA UF CONICA REDONDEADA 1 RADIO TURBINAS-SUA
D03,85-R1,00-G8-END MILL TAPER BALL NOSED 1 RADIUS TURBINES SUA
- IZAR Std.
- UF Grain
- SUA
- 3.85
- 6.00
- 60.00
- 15.00
- 3
- Flat
- 1.00
- 1
- Copper-Bronze-Brass
- Aluminium-Magnesium
- Thermo-Resistant Alloys
- Cast Iron
- Stainless
- Steel
- Alloys Al-Mg Si < 10% (<180 HB / <600 N/mm2)
- Al-Mg non-alloyed (<100 HB / <350 N/mm2)
- Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
- Aleaciones termorresistentes
- Cast Iron (<200 HB / <700 N/mm2)
- Ferritic / Martensitic Stainless (<320 HB / <850 N/mm2)
- Materiales resistentes al desgaste (400-500 HB / 1300-1800 N/mm2)
- Alloyed Steel (<300 HB / <1000 N/mm2)
- Treated / Heat-Treatable Alloyed Steel (300-400 HB / 1000-1300 N/mm2)
- Construction / Carbon Steel (<250 HB / <850 N/mm2)
- 0.010
- 105
- 0.008
- 90
- 0.008
- 70
- 0.006
- 65
- 0.006
- 55
- 0.008
- 110
- 0.006
- 80
- 0.006
- 40
- 0.008
- 80
- 0.012
- 260
- 0.012
- 180
P.1 Construction / Carbon Steel (<250 HB/<850 N/mm2) Feed (mm/rev.) 0.010 Cutting Speed (m/min.) 105
P.2 Alloyed Steel (<300 HB / <1000 N/mm2) Feed (mm/rev.) 0.008 Cutting Speed (m/min.) 90
P.3 Treated/Heat-Treatable Alloyed Steel (300-400HB/1000-1300N/mm2) Feed (mm/rev.)0.008 Cutting Speed (m/min.) 70
P.4 Hardox (400-500 HB / 1300-1800 N/mm2) Feed (mm/rev.) 0.006 Cutting Speed (m/min.) 65
P.5 Ferritic/Martensitic Stainless (320HB/<850 N/mm2) Feed (mm/rev.) 0.006 Cutting Speed (m/min.) 55
K.1 Cast Iron (<200 HB / <700 N/mm2) Feed (mm/rev.) 0.008 Cutting Speed (m/min.) 110
K.2 Cast Iron (200-300 HB / 700-1000 N/mm2) Feed (mm/rev.) 0.006 Cutting Speed (m/min.) 80
S Heat-Resistant Alloys Feed (mm/0.006 Cutting Speed (m/min.) 40
N.1 Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2) Feed (mm/rev.) 0.008 Cutting Speed (m/min.) 80
N.3 Al-Mg non-alloyed (<100 HB / <350 N/mm2) Feed (mm/rev.) 0.012 Cutting Speed (m/min.) 260
N.4 Al-Mg Si < 10% Alloy (<180 HB / <600 N/mm2) Feed (mm/rev.) 0.012 Cutting Speed (m/min.) 180