D10,00-R02,00-R85,00-FRESA UF CONICA REDONDEADA 2 RADIOS TURBINAS-SUA
D10,00-R02,00-R85,00-END MILL TAPER BALL NOSED 2 RADIUS TURBINES SUA
- IZAR Std.
- UF Grain
- SUA
- 0.040
- 110
- 10.00
- 75.00
- 25.00
- 4
- Flat
- 2.00
- 85.00
- 1
- Aceros Templados-Endurecidos
- Steel
- Thermo-Resistant Alloys
- Aluminium-Magnesium
- Copper-Bronze-Brass
- Cast Iron
- Stainless
- Aleaciones termorresistentes
- Alloyed Steel (<300 HB / <1000 N/mm2)
- Treated / Heat-Treatable Alloyed Steel (300-400 HB / 1000-1300 N/mm2)
- Construction / Carbon Steel (<250 HB / <850 N/mm2)
- Alloys Al-Mg Si < 10% (<180 HB / <600 N/mm2)
- Al-Mg non-alloyed (<100 HB / <350 N/mm2)
- Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
- Cast Iron (<200 HB / <700 N/mm2)
- Materiales resistentes al desgaste (400-500 HB / 1300-1800 N/mm2)
- Ferritic / Martensitic Stainless (<320 HB / <850 N/mm2)
- 0.030
- 375
- 0.030
- 320
- 0.020
- 300
- 0.020
- 265
- 0.040
- 130
- 0.030
- 250
- 0.030
- 200
- 0.030
- 80
- 0.030
- 260
- 0.040
- 500
Cutting Speed (m/min.) 110 H Heat-Treated Alloys Feed (mm/rev.) 0.040
P.1 Construction / Carbon Steel (<250 HB/<850 N/mm2) Feed (mm/rev.) 0.030 Cutting Speed (m/min.) 375
P.2 Alloyed Steel (<300 HB / <1000 N/mm2) Feed (mm/rev.) 0.030 Cutting Speed (m/min.) 320
P.3 Treated/Heat-Treatable Alloyed Steel (300-400HB/1000-1300N/mm2) Feed (mm/rev.)0.020 Cutting Speed (m/min.) 300
P.4 Hardox (400-500 HB / 1300-1800 N/mm2) Feed (mm/rev.) 0.020 Cutting Speed (m/min.) 265
P.5 Ferritic/Martensitic Stainless (320HB/<850 N/mm2) Feed (mm/rev.) 0.040 Cutting Speed (m/min.) 130
K.1 Cast Iron (<200 HB / <700 N/mm2) Feed (mm/rev.) 0.030 Cutting Speed (m/min.) 250
K.2 Cast Iron (200-300 HB / 700-1000 N/mm2) Feed (mm/rev.) 0.030 Cutting Speed (m/min.) 200
S Heat-Resistant Alloys Feed (mm/0.030 Cutting Speed (m/min.) 80
N.1 Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2) Feed (mm/rev.) 0.030 Cutting Speed (m/min.) 260
N.3 Al-Mg non-alloyed (<100 HB / <350 N/mm2) Feed (mm/rev.) 0.040 Cutting Speed (m/min.) 500