32,00 mm-FRESA DESBASTE GRUESO PMX DIN844NR LARGA NZ-
Ref.: 6690
06,00 mm-END MILL COARSE ROUGHING PMX DIN844NR LONG NZ
Product Code: 20568
TECHNICAL DETAILS:
DIN 
COM_VIRTUEMART_335936
- 844
DIN Type
COM_VIRTUEMART_336123
- NR
Tool Mat
COM_VIRTUEMART_336055
- PMX
D mm
COM_VIRTUEMART_335920
- 6.00
d mm
COM_VIRTUEMART_335925
- 6.00
L mm
COM_VIRTUEMART_336001
- 68.00
l mm
COM_VIRTUEMART_336002
- 24.00
Z
COM_VIRTUEMART_336171
- 4
Helix Angle
COM_VIRTUEMART_335881
- 30º
Shank
COM_VIRTUEMART_336020
- Weldon
Uds Pack
COM_VIRTUEMART_336156
- 1
APPLICATION
Group
COM_VIRTUEMART_335978
- Aluminium-Magnesium
- Copper-Bronze-Brass
- Steel
Mat
COM_VIRTUEMART_336022
- Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
- Alloys Al-Mg Si < 10% (<180 HB / <600 N/mm2)
- Al-Mg non-alloyed (<100 HB / <350 N/mm2)
- Long Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
- Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
- Construction / Carbon Steel (<250 HB / <850 N/mm2)
1.1 Construction / Carbon Steel (<250 HB/<850 N/mm2) Feed (mm/rev.) 0,030 Cutting Speed (m/min.) 35-45
5.1 Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2) Feed (mm/rev.) 0,042 Cutting Speed (m/min.) 70-120
5.2 Long Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2) Feed (mm/rev.) 0,030 Cutting Speed (m/min.) 70-120
6.1 Al-Mg non-alloyed (<100 HB / <350 N/mm2) Feed (mm/rev.) 0,042 Cutting Speed (m/min.) 190-240
6.2 Al-Mg Si < 10% Alloy (<180 HB / <600 N/mm2) Feed (mm/rev.) 0,042 Cutting Speed (m/min.) 190-240
6.3 Al-Mg Si > 10% Alloy (<180 HB / <600 N/mm2) Feed (mm/rev.) 0,030 Cutting Speed (m/min.) 60-96