06,00 mm-FRESA DESBASTE FINO MICROGRANO IZAR-STD.WR NZ INOX-CROMAX
Ref.: 9647
12,00 mm-END MILL FINE PITCH ROUGHING MICROGRAIN+CROMAX DIN844NRF NZ STAINLESS-CROMAX
Product Code: 43285
TECHNICAL DETAILS:
DIN 
COM_VIRTUEMART_335936
- IZAR Std.
DIN Type
COM_VIRTUEMART_336123
- WR
Tool Mat
COM_VIRTUEMART_336055
- Micrograin
Coating
COM_VIRTUEMART_336103
- CROMAX
D mm
COM_VIRTUEMART_335920
- 12.00
d mm
COM_VIRTUEMART_335925
- 12.00
L mm
COM_VIRTUEMART_336001
- 83.00
Z
COM_VIRTUEMART_336171
- 3
Helix Angle
COM_VIRTUEMART_335881
- 45º
Shank
COM_VIRTUEMART_336020
- Weldon
Uds Pack
COM_VIRTUEMART_336156
- 1
APPLICATION
Group
COM_VIRTUEMART_335978
- Aluminium-Magnesium
- Thermo-Resistant Alloys
- Stainless
Mat
COM_VIRTUEMART_336022
- Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
- Titanium Alloys
- Ferritic / Martensitic Stainless (<320 HB / <850 N/mm2)
- Austenitic Stainless (<250 HB / <850 N/mm2)
M Austenitic Stainless (<250 HB / <850 N/mm2) Feed (mm/rev.)
COM_VIRTUEMART_335818
- 0.070
Cutting Speed (m/min.)
COM_VIRTUEMART_335820
- 50-80
P.5 Ferritic/Martensitic Stainless (320HB/<850 N/mm2) Feed (mm/rev.)
COM_VIRTUEMART_335822
- 0.070
Cutting Speed (m/min.)
COM_VIRTUEMART_335824
- 90-110
2.1 Austenitic Stainless (<250 HB / <850 N/mm2) Feed (mm/rev.) 0,070 Cutting Speed (m/min.) 50-80
2.2 Ferritic/Martensitic Stainless (320HB/<850 N/mm2) Feed (mm/rev.) 0,070 Cutting Speed (m/min.) 90-110
4 Titanium Alloys Feed (mm/rev.) 0,100 Cutting Speed (m/min.) 50-80
6.3 Al-Mg Si > 10% Alloy (<180 HB / <600 N/mm2) Feed (mm/rev.) 0,100 Cutting Speed (m/min.) 100-230