20,00 mm-FRESA CONICA HSSE8% DIN326DN 2Z-
40,00 mm-END MILL TAPER HSSE8% DIN326DN 2Z
- 326 D
- N
- HSSE 8% Co
- 40.00
- 163
- 38.00
- 2
- 4
- 30º
- Taper
- 1
- Aluminium-Magnesium
- Copper-Bronze-Brass
- Cast Iron
- Stainless
- Steel
- Alloys Al-Mg Si < 10% (<180 HB / <600 N/mm2)
- Al-Mg non-alloyed (<100 HB / <350 N/mm2)
- Long Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
- Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)
- Cast Iron (200-300 HB / 700-1000 N/mm2)
- Cast Iron (<200 HB / <700 N/mm2)
- Ferritic / Martensitic Stainless (<320 HB / <850 N/mm2)
- Austenitic Stainless (<250 HB / <850 N/mm2)
- Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
- Construction / Carbon Steel (<250 HB / <850 N/mm2)
1.1 Construction / Carbon Steel (<250 HB/<850 N/mm2) Feed (mm/rev.) 0,100 Cutting Speed (m/min.) 30-40
2.1 Austenitic Stainless (<250 HB / <850 N/mm2) Feed (mm/rev.) 0,065 Cutting Speed (m/min.) 15-20
2.2 Ferritic/Martensitic Stainless (320HB/<850 N/mm2) Feed (mm/rev.) 0,065 Cutting Speed (m/min.) 15-20
3.1 Cast Iron (<200 HB / <700 N/mm2) Feed (mm/rev.) 0,100 Cutting Speed (m/min.) 20-30
3.2 Cast Iron (200-300 HB / 700-1000 N/mm2) Feed (mm/rev.) 0,100 Cutting Speed (m/min.) 15-30
5.1 Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2) Feed (mm/rev.) 0,100 Cutting Speed (m/min.) 60-100
5.2 Long Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2) Feed (mm/rev.) 0,100 Cutting Speed (m/min.) 60-100
6.1 Al-Mg non-alloyed (<100 HB / <350 N/mm2) Feed (mm/rev.) 0,130 Cutting Speed (m/min.) 160-200
6.2 Al-Mg Si < 10% Alloy (<180 HB / <600 N/mm2) Feed (mm/rev.) 0,130 Cutting Speed (m/min.) 160-200
6.3 Al-Mg Si > 10% Alloy (<180 HB / <600 N/mm2) Feed (mm/rev.) 0,100 Cutting Speed (m/min.) 50-80