15,00 mm-ESCARIADOR HSS Co DIN208B CONICO-
- 208
- B
- HSSE 5% Co
- 14.50
- 204
- 50.00
- 8
- 2
- Taper
- 521
- Machine
- 1
- Aluminium-Magnesium
- Stainless
- Steel
- Construction / Carbon Steel (<250 HB / <850 N/mm2)
- Alloyed Steel (<300 HB / <1000 N/mm2)
- Treated / Heat-Treatable Alloyed Steel (300-400 HB / 1000-1300 N/mm2)
- Ferritic / Martensitic Stainless (<320 HB / <850 N/mm2)
- Al-Mg non-alloyed (<100 HB / <350 N/mm2)
- Alloys Al-Mg Si < 10% (<180 HB / <600 N/mm2)
- Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
- 0.250
- 8-12
- 6-8
- 0.160
- 4-6
- 0.160
- 4-6
- 0.250
- 15-30
- 0.250
- 15-30
- 8-10
P.1 Construction / Carbon Steel (<250 HB/<850 N/mm2) Feed (mm/rev.) 0,250 Cutting Speed (m/min.) 8-12
P.2 Alloyed Steel (<300 HB / <1000 N/mm2) Feed (mm/rev.) 0,200 Cutting Speed (m/min.) 6-8
P.3 Treated/Heat-Treatable Alloyed Steel (300-400HB/1000-1300N/mm2) Feed (mm/rev.)0,160 Cutting Speed (m/min.) 4-6
P.5 Ferritic/Martensitic Stainless (320HB/<850 N/mm2) Feed (mm/rev.) 0,160 Cutting Speed (m/min.) 4-6
N.3 Al-Mg non-alloyed (<100 HB / <350 N/mm2) Feed (mm/rev.) 0,250 Cutting Speed (m/min.) 15-30
N.4 Al-Mg Si < 10% Alloy (<180 HB / <600 N/mm2) Feed (mm/rev.) 0,250 Cutting Speed (m/min.) 15-30
N.5 Al-Mg Si > 10% Alloy (<180 HB / <600 N/mm2) Feed (mm/rev.) 0,250 Cutting Speed (m/min.) 8-10