- 208
- B
- HSSE 5% Co
- 5.00
- 133
- 23.00
- 6
- 1
- Taper
- 521
- Machine
- 1
- Aluminium-Magnesium
- Stainless
- Steel
- Alloys Al-Mg Si > 10% (<180 HB / <600 N/mm2)
- Alloys Al-Mg Si < 10% (<180 HB / <600 N/mm2)
- Al-Mg non-alloyed (<100 HB / <350 N/mm2)
- Ferritic / Martensitic Stainless (<320 HB / <850 N/mm2)
- Treated / Heat-Treatable Alloyed Steel (300-400 HB / 1000-1300 N/mm2)
- Alloyed Steel (<300 HB / <1000 N/mm2)
- Construction / Carbon Steel (<250 HB / <850 N/mm2)
1.1 Construction / Carbon Steel (<250 HB/<850 N/mm2) Feed (mm/rev.) 0,120 Cutting Speed (m/min.) 8-12
1.2 Alloyed Steel (<300 HB / <1000 N/mm2) Feed (mm/rev.) 0,100 Cutting Speed (m/min.) 6-8
1.3 Treated/Heat-Treatable Alloyed Steel (300-400HB/850-1300N/mm2) Feed (mm/rev.) 0,100 Cutting Speed (m/min.) 4-6
2.2 Ferritic/Martensitic Stainless (320HB/<850 N/mm2) Feed (mm/rev.) 0,100 Cutting Speed (m/min.) 4-6
6.1 Al-Mg non-alloyed (<100 HB / <350 N/mm2) Feed (mm/rev.) 0,160 Cutting Speed (m/min.) 15-30
6.2 Al-Mg Si < 10% Alloy (<180 HB / <600 N/mm2) Feed (mm/rev.) 0,160 Cutting Speed (m/min.) 15-30
6.3 Al-Mg Si > 10% Alloy (<180 HB / <600 N/mm2) Feed (mm/rev.) 0,160 Cutting Speed (m/min.) 8-10